This general purpose controllers is ideal for all process applications. One key feature is its simple (key-in) calibration procedure, which removes the need for an input sginal during calibration.

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-PRC Process Controller Data Sheet

This universal AC indicator and larm controller is ideal for monitoring and controlling input power, voltage, current or frequency

• 5 buttons, 4 setpoint indicator LED's (R$ & R4A only)
• 20mm LED display, 4 digit
• IP65 dust and splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal:
  • Current (0-5A AC)
  • Voltage (0-300V AC)
• Accuracy
  • True RMS current: 0.05%
  • True RMS Voltage: 0.1%
  • Power: 0.1%
  • Freq: 0.01Hz
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-UAC Universal AC Controller Data Sheet

This controller is ideal for a variety of applications where instant, visual indication of the process variable is required. it is particularly suited to level measurement or rate movement indication

• 3 buttons, 6 setpoint indicator LED's
• 8mm LED display, 5 digits
• 0-100% bar graph
• IP65 dust & splash proof
• Panel mount: 96 x 48 x 119.5mm
• Input Signal:
  • Current (0/4-20mA)
  • Voltage (0-2/10V)
• Excitation: 24V DC (50mA max)
• Sampling Rate: 10Hz
• Resolution: 16-bit
• Accuracy: 0.05% of reading
• Temp. drift: Typically 50ppm/ºC
• Linearization: Linearization tables up to 32-point, (program with serial port)
• Relay outputs: 2 x 5A form A ro 4 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

  TEX-BAR Bar Graph Controller Data Sheet
  
  
  

Thsi controller is ideal for a variety of flow and dual totaliser applications. It accepts inputs from industrial pulse and frequency flow sensors.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, Mag, TTL, Digital, Closed contact & Namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Sampling Rate: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC

Optional:

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

TEX-FLO010 Flow Rate Controller Data Sheet

This controller is ideal for displaying and controlling melt pressure in various applications. It is particularly suited to injection modling machines

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Sensor inputs: 2-3.5mV/V (80% shunt cal)
• Excitation: 8 VDC provided by controller
• Resolution: 16-bit
• Sampling rate: 10Hz
• Accuracy: 0.005%
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial Port: Isolated RS232/485

TEX-MP100 Melt Pressure Controller Data Sheet

This general purpose controller is ideal for all process applications. One key feature is the simple (key-in) calibration procedurem which removes the need for an input signal during calibration. The 6-digit display allows viewing of higher diplay values

• 5 buttons, 6 setpoins indicator LED's
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal:
  • Current (0/4-20mA)
  • Voltage (0-2/10V)
• Excitation: 24VDC (50mA max)
• Resolution: 16-bit
• Sampling rate: 10Hz
• Accuracy: 0.05%
• Temp drift: Typically 50ppm/ºC
• Relay outputs: 2 x 5A form A or 4 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

TEX-PRC Process Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It is also ideal for length cutting and multi-channel coupling.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 0-24VDC, 0-30VAC
• Sensor types: Quad (x1, x2, x4), NPN, PNP, TTL
• Excitation: 24/5VDC(50/200mA max)
• Noise filtering: 20kHz, off
• Pulse width: must be > 5µs

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resolution: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad x1, x2)
  • 38kHz (C)
• Sampling rate: 10msec

PRO-CTR100 Counter / Rate Batching Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It is also ideal for length cutting and multi-channel coupling. The dual display allows simultaneous viewing of count and rate.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 2 x 10mm, 6 digit LED display
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 0-24VDC, 0-30VAC
• Sensor types: Quad (x1, x2, x4), NPN, PNP, TTL
• Excitation: 24/5VDC (50/200mA max)
• Noise filtering: 20kHz, off
• Pulse width: must be > 5µs

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resolution: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad x1, x2)
  • 38kHz (C)
• Sampling rate: 10msec

PRO-CTR200 Counter / Rate Batching Controller Data Sheet

This sophisticated contoller is ideal for a variety of flow rate and batching applications. The dual siplay allows the user to view total and flow rate simultaneously.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 2 x 10mm, 6 digit LED display
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, mag, TTL, digital, closed contact & namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Sampling Rate: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC

Optional:

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

PRO-FLO200 Flow Batching Totaliser Data Sheet

This sophisticated controller comes factory pre-calibrated to suit either a 4-wire or a 6-wire strain gauge input, and is designed specifically for weighing applications

• 5 buttons, 4 setpoint indicator LED's and 1 NET indicator LED (R4, R4A, R4S & R4AS only)
• 13mm led display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 4/6 wire strain gauge, 1-5mV/V
• Excitation: 5VDC, supplied by controller (powers up to 8 x 350Ω Loadcells)
• Sampling rate: Up to 50Hz
• Resolution: 18-bit
• Accuracy: 0.005% of reading
• Temp drift: Typically 3ppm/ºC

Optional

• Relay outputs: 4 x 5A from A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Isolated RS232/485

PRO-WEI100 Load-Cell Batching Controller Data Sheet

This versatile counter is compatible with a range of sensors, including NPN, PNP, namur, proximity switches and rotary encoders. It comes in a DIN-rail mountable case with a built-in LCD display for simple operator interface.
This controller can be scaled to suit a variety of applications, sauch as pulse, distance, length and difference.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input signal: 3 hardware counters (independent)
• Sensor types: Quad (1x, 2x, 4x), NPN, PNP, mV, TTL
• Count modes: Quad (11x, 2x, 4x), A+B, A-B, A+B+C, A/B indp, Up/Down, C counter (used to capture, reset, zero and/or restart A & B counters)
• Excitation: 24/5VDC (50/200mA max)
• Input frequency:
  • 10kHz (Quad 4x, A, B)
  • 20kHz (Quad 1x, 2x)
  • 38kHz (C)
• Frequency: 100kHz on A input
• Noise filtering: 20kHz, off
• Relay outputs: 2 x 5A form A relays volumetric pulse (max 3A 240VAC or 3A 30VDC)

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-CTR Counter / Rate Controller Data Sheet

This controller is ideal for variety of flow application requiring totalising and batching, and is able to display both of these variables simultaneously on it built-in dual display
It accepts pulse or analog inputs, provides power to drive the flow meter, and comes in a DIN-rail mountable case for simple installation.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, mag, TTL, digital, closed contact & namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Frequency: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC
• Relay outputs: 2 x 5A form A

Optional:

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

SC-FLO Flow Rate Controller Data Sheet

This versatile instrument accepts a 0-20mA or 4-20mA process input signal. It is ideal for a variety of application including depth or level sensors and pressure, temperature or humidity trasnmitters.
The controller supplies 24V excitation, allowing you to power a 2/3-wire input loop. It comes in a hassle free DIN-rail mountable case with a built-in LCD display for simple operator interface.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input Signal: 0-20mA or 4-20mA
• Excitation: 24VDC (50mA max)
• Sampling Rate: 10Hz
• Resolution: 16-bit
• Accuracy: 0.05% of reading
• Temp. drift: Typically 50ppm/ºC
• Relay outputs: 2 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-PRC Process Controller Data Sheet

This versatile instruments is designed to accept standard 4-6 wire bridge type load-cell inputs directly. Common application include force, torque, load, strain and pressure measurement.
It also comes in a hasle free DIN-rail mountable case with a built-in LCD display for simple operator interface

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input signal: 4/6 wire strain gauge, 1-5mV/V
• Excitation: 5VDC, supplied by controller (powers up to 8 x 350Ω Loadcells)
• Sampling rate: Up to 50Hz
• Resolution: 18-bit
• Accuracy: 0.005% of reading
• Temp drift: Typically 3ppm/ºC
• Relay outputs: 2 x 5A from A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-WEI Weighing / Load-Cell Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It comes in a convient wall mountable enclosure for hassle free installation.

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: isolated RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resoltuion: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad 1x, 2x)
  • 38kHz (C)
• Sampling rate: 10msec

WM-CTR Wall Mount Counter / Rate Batching Controller Data Sheet

This controller is suitable for a variety of flow and dual totaliser applications, and accepts inputs from industrial pulse and frequency, flow sensors. It comes in a convient, wall mountable enclosure for hassle free installation.

This controller is suited to a wide variety of process applications. It comes in a convenient, wall mountable enclosure for hassle free installation.

This controller is suited to a wide variety of weighing and batching applications. It comes in a conveniient, wall mountable enclosure for hassle free installation.

• Dual 4 Digit, 0.4"(10mm) LED, 0.3"(7.6mm) LED
• Thermocouple / RTD / Process
• Ramp / Soak
• Multi - Setpoint
• Relay, SSR Drive, Triac Output, and Linear DC Output

PCU Process Control Unit Data Sheet

PSC - Process Setpoint Controller

• Dual 4 Digit, 0.4"(10mm) LED, 0.3"(7.6mm) LED
• Ramp / Soak
• HCM: Heater Current Monitor
• MVP: Motor Valve Positioner
• RSP: Remote Setpoint
• Relay, SSR Drive, Triac Output, and Linear DC Outputs

PSC Process Setpoint Controller Data Sheet

PAXI - Counter / Rate Panel Meter

• 6 Digit, 0.56"(14MM) LED
• Dual Counter with Rate Inicator
• Separate Counter Scaling
• Plug-In Option Cards
• Communication & Bus Capabilities
• Maximum & Minimum Reading Memory

PAXI Counter / Rate Panel Meter Data Sheet

• Process Input
  
• 1/8 DIN (50 mm x 97 mm)
  
• 4 1/2 Digit, 0.56" (14 mm) LED
  
• 20 mA or 10 VDC Input
  
• Field Upgradeable Option Cards
  
• AC and DC Powered Versions
  
• NEMA 4X/IP65

PAXP - Process input Panel Meter Data Sheet