This general purpose controllers is ideal for all process applications. One key feature is its simple (key-in) calibration procedure, which removes the need for an input sginal during calibration.

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-PRC Process Controller Data Sheet

This general purpose rate controller is ideal for rate indication and alarm control in a variety of motor applications

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-RPM RPM Controller Data Sheet

This general purpose, high accuracy temperature controller has been specifically designed for RTD probes, and is ideal for a variety of indiciation and alarm control temperature applications

• 5 buttons, 4 setpoint indicator LED's (R4 & R4A only)
• 20mm LED display, 4 digit
• IP65 dust and spleash proof
• Panel mount case: 48 x 96 x 119.5mm
• Sensor type: 2-wire, 3-wire, 4-wire RTD (385, 392, 120, Cn10)
• Sampling Rate: 2.5Hz
• Resolution: 16-bit
• Accuracy 0.05% of reading
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outpus: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-RTD RTD Temperature Controller Data Sheet

This universal temperature controller is suitable for all common thermocouple probe types, and is ideal for indication and alarm control temperature applications.

• 5 buttons, 4 setpoint indicator LED's (R4 & R4A only)
• 20mm LED display, 4 digit
• IP65 dust and spleash proof
• Panel mount case: 48 x 96 x 119.5mm
• Sensor type: Thermocouple B, J, K, N, R, S, T type
• Sampling Rate: 2.5Hz
• Resolution: 16-bit
• Accuracy 0.05% of reading
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outpus: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-TC Thermocouple Temperature Controller Data Sheet

This universal AC indicator and larm controller is ideal for monitoring and controlling input power, voltage, current or frequency

• 5 buttons, 4 setpoint indicator LED's (R$ & R4A only)
• 20mm LED display, 4 digit
• IP65 dust and splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal:
  • Current (0-5A AC)
  • Voltage (0-300V AC)
• Accuracy
  • True RMS current: 0.05%
  • True RMS Voltage: 0.1%
  • Power: 0.1%
  • Freq: 0.01Hz
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output

LD-UAC Universal AC Controller Data Sheet

This controller is ideal for a variety of applications where instant, visual indication of the process variable is required. it is particularly suited to level measurement or rate movement indication

• 3 buttons, 6 setpoint indicator LED's
• 8mm LED display, 5 digits
• 0-100% bar graph
• IP65 dust & splash proof
• Panel mount: 96 x 48 x 119.5mm
• Input Signal:
  • Current (0/4-20mA)
  • Voltage (0-2/10V)
• Excitation: 24V DC (50mA max)
• Sampling Rate: 10Hz
• Resolution: 16-bit
• Accuracy: 0.05% of reading
• Temp. drift: Typically 50ppm/ºC
• Linearization: Linearization tables up to 32-point, (program with serial port)
• Relay outputs: 2 x 5A form A ro 4 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

TEX-BAR Bar Graph Process Controller Data Sheet

This counter is ideal for indicating totalisation and monitoring rates.

Thsi controller is ideal for a variety of flow and dual totaliser applications. It accepts inputs from industrial pulse and frequency flow sensors.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, Mag, TTL, Digital, Closed contact & Namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Sampling Rate: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC

Optional:

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

TEX-FLO010 Flow Rate Controller Data Sheet

This controller is ideal for displaying and controlling melt pressure in various applications. It is particularly suited to injection modling machines

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Sensor inputs: 2-3.5mV/V (80% shunt cal)
• Excitation: 8 VDC provided by controller
• Resolution: 16-bit
• Sampling rate: 10Hz
• Accuracy: 0.005%
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial Port: Isolated RS232/485

TEX-MP100 Melt Pressure Controller Data Sheet

This indicator and controller is the ideal tool for displaying and controlling both melt pressure and temperature in injection molding machines. It is compatible with both J and K type thermocouple sensor inputs

• 5 buttons, 6 setpoint indicator LED's (R4 & R4A only)
• 2 x 10mm 6 digit LED display
• IP65 dust and spleash proof
• Panel mount case: 48 x 96 x 119.5mm
• TC input: Suits J or K type
• Pressure sensor: 2-3.5mV/V (80% shunt cal)
• Excitation: 8VDC provided by controller
• Resolution: 16-bit
• Sampling Rate: 10Hz
• Accuracy 0.005%
• Temp drift: Typically 50ppm/ºC

Optional

• Relay outpus: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
  Optional: dual 10-0-10V for pressure and temperature

TEX-MPT200 Melt Pressure Temperature Controller Data Sheet

This general purpose controller is ideal for all process applications. One key feature is the simple (key-in) calibration procedurem which removes the need for an input signal during calibration. The 6-digit display allows viewing of higher diplay values

• 5 buttons, 6 setpoins indicator LED's
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal:
  • Current (0/4-20mA)
  • Voltage (0-2/10V)
• Excitation: 24VDC (50mA max)
• Resolution: 16-bit
• Sampling rate: 10Hz
• Accuracy: 0.05%
• Temp drift: Typically 50ppm/ºC
• Relay outputs: 2 x 5A form A or 4 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

TEX-PRC Process Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It is also ideal for length cutting and multi-channel coupling.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 13mm LED display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 0-24VDC, 0-30VAC
• Sensor types: Quad (x1, x2, x4), NPN, PNP, TTL
• Excitation: 24/5VDC(50/200mA max)
• Noise filtering: 20kHz, off
• Pulse width: must be > 5µs

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resolution: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad x1, x2)
  • 38kHz (C)
• Sampling rate: 10msec

PRO-CTR100 COunter / Rate Batching Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It is also ideal for length cutting and multi-channel coupling. The dual display allows simultaneous viewing of count and rate.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 2 x 10mm, 6 digit LED display
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 0-24VDC, 0-30VAC
• Sensor types: Quad (x1, x2, x4), NPN, PNP, TTL
• Excitation: 24/5VDC (50/200mA max)
• Noise filtering: 20kHz, off
• Pulse width: must be > 5µs

Optional

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resolution: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad x1, x2)
  • 38kHz (C)
• Sampling rate: 10msec

PRO-CTR200 Counter / Rate Batching Controller Data Sheet

This sophisticated contoller is ideal for a variety of flow rate and batching applications. The dual siplay allows the user to view total and flow rate simultaneously.

• 5 buttons, 6 setpoins indicator LED's (R4, R4A, R4S & R4AS only)
• 2 x 10mm, 6 digit LED display
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, mag, TTL, digital, closed contact & namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Sampling Rate: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC

Optional:

• Relay outputs: 4 x 5A form A
• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

PRO-FLO200 Flow Batching Totaliser Data Sheet

This sophisticated controller comes factory pre-calibrated to suit either a 4-wire or a 6-wire strain gauge input, and is designed specifically for weighing applications

• 5 buttons, 4 setpoint indicator LED's and 1 NET indicator LED (R4, R4A, R4S & R4AS only)
• 13mm led display, 6 digit
• IP65 dust & splash-proof
• Panel mount: 48 x 96 x 119.5mm
• Input signal: 4/6 wire strain gauge, 1-5mV/V
• Excitation: 5VDC, supplied by controller (powers up to 8 x 350Ω Loadcells)
• Sampling rate: Up to 50Hz
• Resolution: 18-bit
• Accuracy: 0.005% of reading
• Temp drift: Typically 3ppm/ºC

Optional

• Relay outputs: 4 x 5A from A
• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Isolated RS232/485

PRO-WEI Load-Cell Batching Controller Data Sheet

This meter is popular for its versatility and compactness, and for its ability to be powered from the 4-20mA current loop input signal
It can be used to measure a variety of process variables such as flow, level, pressure and temperature

• 3 buttons
• 13mm LED display, 6 digit (6th digit is a descriptor)
• IP65 dust & splash proof
• Short-depth panel mount case - 48 x 96 x 19mm
• Input signal: 4-20mA Dc(min input 3.5mA, max continuous input 100mA)
• Power supply: Powered from tyhe 4-20mA current loop input signal
• Descriptor digitL 6th display digit is a descriptor, choose ºC, ºF or dummy "0"
• Input impedance: Appoximately 200Ω. 3.4V drop, plus 20Ω (3.9V at 20mA)
• Full scale range: Adjustable to any display span between -19,999 & 30,000
• Max resolution: 50,000 counts (from any input span between 3.5 & 27.5mA)
• A/D converter: 16-bit sigma delta
• Accuracy: ±0.02@ of reading (+2 digits)
• Temp. coefficient: Typically 30ppm/ºC (plus 0.1 count/ºC for zero offset)
• Conversion rate: 3 reading/second
• Decimal point: Adjustable 6 positions
• +/- Over-range: Display shows "------"

SD-50X Panel-Mount Loop Powered Meter Data Sheet

This versatile counter is compatible with a range of sensors, including NPN, PNP, namur, proximity switches and rotary encoders. It comes in a DIN-rail mountable case with a built-in LCD display for simple operator interface.
This controller can be scaled to suit a variety of applications, sauch as pulse, distance, length and difference.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input signal: 3 hardware counters (independent)
• Sensor types: Quad (1x, 2x, 4x), NPN, PNP, mV, TTL
• Count modes: Quad (11x, 2x, 4x), A+B, A-B, A+B+C, A/B indp, Up/Down, C counter (used to capture, reset, zero and/or restart A & B counters)
• Excitation: 24/5VDC (50/200mA max)
• Input frequency:
  • 10kHz (Quad 4x, A, B)
  • 20kHz (Quad 1x, 2x)
  • 38kHz (C)
• Frequency: 100kHz on A input
• Noise filtering: 20kHz, off
• Relay outputs: 2 x 5A form A relays volumetric pulse (max 3A 240VAC or 3A 30VDC)

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-CTR Counter / Rate Controller Data Sheet

This controller is ideal for variety of flow application requiring totalising and batching, and is able to display both of these variables simultaneously on it built-in dual display
It accepts pulse or analog inputs, provides power to drive the flow meter, and comes in a DIN-rail mountable case for simple installation.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input Signal: 0-24VDC, 0-30VAC
• Sensor types: NPN, PNP, mag, TTL, digital, closed contact & namur
• Noise filtering: 0.2, 2, 20 kHz or off
• Excitation: 24V DC (50mA max)
• Frequency: 2Hz to 10Hz
• K factor range: 0.1 to 99.9999, 999.999 or 9999.99
• Accuracy: 0.005%
• Temp. drift: Typically 2ppm/ºC
• Relay outputs: 2 x 5A form A

Optional:

• Analog output: Isolated 16-bit 4-20Ma or 0-10V output
• Serial Port: Isolated RS232/485

SC-FLO Flow Rate Controller Data Sheet

This versatile instrument accepts a 0-20mA or 4-20mA process input signal. It is ideal for a variety of application including depth or level sensors and pressure, temperature or humidity trasnmitters.
The controller supplies 24V excitation, allowing you to power a 2/3-wire input loop. It comes in a hassle free DIN-rail mountable case with a built-in LCD display for simple operator interface.

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input Signal: 0-20mA or 4-20mA
• Excitation: 24VDC (50mA max)
• Sampling Rate: 10Hz
• Resolution: 16-bit
• Accuracy: 0.05% of reading
• Temp. drift: Typically 50ppm/ºC
• Relay outputs: 2 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-PRC Prcoess Controller Data Sheet

This general purpose, has been specifically designed for RTD probes, and is ideal for a variety of temperature applications requiring high levels ofprecision and resolution.
It can easily be set to read ºC ro ºF, and comes in a hassle free DIN-rail mountable case with a built in LCD display for simple operator interface

• 5 buttons
• 2x 8mm, 8 digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Sensor type: 2-wire, 3-wire, 4-wire RTD (385, 392, 120, Cn10)
• Sampling Rate: 2.5Hz
• Resolution: 16-bit
• Accuracy 0.05% of reading
• Temp drift: Typically 50ppm/ºC
• Relay outpus: 2 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-RTD RTD Temperature Controller Data Sheet

SC-TC - Thermocouple Temperature Controller

This general purpose temeprature controller has been designed specifically for thermocpuple probes, and is ideal for a variety of temperature applications requiring high levels of precision and resultion.
It can easily be set to read ºC ro ºF, and comes in a hassle free DIN-rail mountable case with a built in LCD display for simple operator interface

• 5 buttons
• 2x 8mm, 8 digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Sensor type: Thermocouple B, J, K, N, R, S, T type
• Sampling Rate: 2.5Hz
• Resolution: 16-bit
• Accuracy 0.05% of reading
• Temp drift: Typically 50ppm/ºC
• Relay outpus: 2 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-TC Thermocouple Temperature Controller Data Sheet

This universal AC coontroller is suitable for either currrent or voltage. This make it ideal for a variety of application, such as power current mearurement, noise current/voltage neasurement or speed measurement from an AC tach generator
This controller is easy to scale to your preferred CT ratio, and comes in a DIN-rail mountable case with built-in LCD display for simple operator interface

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input signal:
  • Current (0-5A AC)
  • Voltage (0-300V AC)
• Accuracy
  • True RMS current: 0.05%
  • True RMS Voltage: 0.1%
  • Power: 0.1%
  • Freq: 0.01Hz
• Temp drift: Typically 50ppm/ºC
• Relay outputs: 2 x 5A form A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-UAC Universal AC Controller Data Sheet

This versatile instruments is designed to accept standard 4-6 wire bridge type load-cell inputs directly. Common application include force, torque, load, strain and pressure measurement.
It also comes in a hasle free DIN-rail mountable case with a built-in LCD display for simple operator interface

• 5 buttons
• 2 x 8mm, 8-digit LED display
• 35mm DIN rail case: 101 x 45 x 119.5mm
• Input signal: 4/6 wire strain gauge, 1-5mV/V
• Excitation: 5VDC, supplied by controller (powers up to 8 x 350Ω Loadcells)
• Sampling rate: Up to 50Hz
• Resolution: 18-bit
• Accuracy: 0.005% of reading
• Temp drift: Typically 3ppm/ºC
• Relay outputs: 2 x 5A from A

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: Front panel isolated RS232/485

SC-WEI Weighing / Load-Cell Controller Data Sheet

This controller is suited to a wide variety of rate monitoring and batching applications. It comes in a convient wall mountable enclosure for hassle free installation.

Optional

• Analog output: Isolated 16-bit 4-20mA or 0-10V output
• Serial port: isolated RS232/485

Rate:

• Input frequency: 20kHz max
• Sampling rate: 100msec
• Resoltuion: 0.01Hz
• Accuracy: 0.005%
• Temp drift: Typically 2ppm/ºC

Counter:

• Input frequency:
  • 10kHz (Quad x4, A, B)
  • 20kHz (Quad 1x, 2x)
  • 38kHz (C)
• Sampling rate: 10msec

WM-CTR Wall Mount Counter / Rate Batching Controller Data Sheet

This controller is suitable for a variety of flow and dual totaliser applications, and accepts inputs from industrial pulse and frequency, flow sensors. It comes in a convient, wall mountable enclosure for hassle free installation.

This controller is suited to a wide variety of process applications. It comes in a convenient, wall mountable enclosure for hassle free installation.

This controller is suited to a wide variety of weighing and batching applications. It comes in a conveniient, wall mountable enclosure for hassle free installation.

PAXD/P - 1/8 DIN Input Meters

• 5 Digit, 0.56"(14mm) LED
• Voltage / Current / Process
• Front Panel / Software Programmable
• Plug - In Option Cards
• Communication & Bus Capabilities
• Maximum & Minimum Reading Memory

PAXD 1/8 Din Analog Input Meter Data Sheet
PAXP 1/8 DIN Process Input Meter Data Sheet

PAXT - 1/8 DIN Temperature Analog Input Meter

• 5 Digit, 0.56"(14mm) LED
• Thermocouple / RTD / Resistance
• Non - Standard Probe Scaling
• Time / Temperature Integrator
• Conforms to ITS - 90 Standards
• Programmable Function Keys / User Inputs

PAXT 1/8 DIN Temperature Analog Input Meter Data Sheet

PAXS - 1/8 DIN Strain Guage Analog Input Meter

• 5 Digit, 0.56"(14mm) LED
• Load Cell / Pressure & Torque Bridge Inputs
• Fast 20 Reading / Second Update Rate
• Programmable Auto - Zero Tracking
• 5 VDC or 10 VDC Bridge Excitation
• Four Set Point Alarm Outputs

PAXS - 1/8 DIN Strain Gauge Analog Input Meter Data Sheet

PAXI - 1/8 Din Counter / Rate Panel Meter

• 5 Digit 0.56"(14mm) LED
• Dual Counter with Rate Indication
• Separate Counter Scaling
• Plug - In Option Cards
• Communication & Bus Capabilities
• Maximum & Minimum Reading Memory

PAXI 1/8 DIN Counter / Rate Panel Meter Data Sheet

PAXLI/V - PAX Lite Current / Volt Meters

• 5 or 6 Digit 1.5"(37mm) LED Display
• Analog, Temp., Process, Count, Rate
• Comm. / Fieldbus Slave Display
• Standard PAX Series Annunciators
• Program w / RLC Pro Windows Software
• Supports PAX Series Option Boards

PAXLI/V PAX Lite Current / Volt Meters Data Sheet

IMT/R - Apollo Intelligent Temperature Meter

• 4 Digit 0.5"(14mm) LED
• Thermocouple / RTD
• F or C Indication
• 4 -20 mA Analog Output
• Integrator / Totaliser

IMT Apollo Intelligent Thermocouple Meter Data Sheet
IMR Apollo Intelligent RTD Meter Data Sheet

IM - 4 1/2 Digit Apollo Intelligent Meter

• 6 Digit, 0.56"(14mm) LED
• Process / Voltage / Current / Strain / Millivolt / 5 AMP
• Peak, Valley, Tare
• Integrator / Totaliser
• Analog Output
• Serial Communications

IMD 4 1/2 Digit Apollo Intelligent Current/Volt Meter Data Sheet
IMP 4 1/2 Digit Apollo Intelligent Process Meter Data Sheet
IMH 4 1/2 Digit Apollo Intelligent 5A AC Current Meter Data Sheet
IMS 4 1/2 Digit Apollo Intelligent Strain Gauge Meter Data Sheet

DP5 - 1/8 DIN Analog Input Panel Meter

• 5 digit, 0.56"(14mm) LED
• Universal DC Input
• Process Input
• Thermocouple / RTD Input
• Custom Unit Overlay w/Backlight
• Programmable Function Keys / User Inputs

DP5 1/8 DIN Analog Input Panel Meter Data Sheet

CUB4LP - Loop Powered Process Indicator
CUB4CL - Current Loop Indicator

• 3 1/2 Digit, 0.6"(15.2mm) LCD
• Reflective, Red Backlighting (CUB4LP - Loop powered)
• Red or Yellow / Green Positive / Negative Backlighting (CUB4CL - external powered)
• 4 to 20 or 10 to 50 mA Input
• Span & Offset

CUB4LP/CUB4CL Indicator Data Sheet

CUB4V/I - Miniature DC Current/Volt Meter

• 3 1/2 Digit, 0.6"(15.2mm) LCD
• Reflective, Red or Green w/Backlighting
• 0 - 199.9 µA through to 199.9 mADC
• 0 - 199.9 mV through 199.9vVDC
• 0.1% Accuracy
• Span Adjustable

CUB4V/I Miniature DC Crruent/Volt Meter Data Sheet

MDMV - Minitature Display Module DC Voltmeter

• Digital Display Voltmeter
• 3 1/2 Digit, 0.4"(10mm) LCD w/ Yellow / Green or Red Backlighting
• 0 to -+1999.9m VDC
• 5 VDC Powered
• Panel or Board Mount
• 5 Selectable Annunciators

MDMV Minitature Display Module DC Voltmeter Data Sheet

Apollo Panel Meters

• 3 1/2 Digit, 0.56"(14mm) LED
• AC / DC voltage / Current
• AC Power Line Monitor
• 5 AMP AC Current
• Current Loop / Process Volt
• Strain Gage / Millivolt

APLCK Real-time Clock/Elasped Time Indicator Data Sheet
APLCL Current Loop Indicator Data Sheet
APLI/V Current / Volt Meters Data Sheet
APLSP Slave Display Data Sheet
APLT Totaliser Counter Data Sheet